Everyday use
More info...
The explanations given on this page will enable you to adjust the image of your TV/DVD set and to program your device to alarm-
clock or self-stopping mode. The channel list will show you , by 10-channel pages, the channels stored in your TV/DVD set, and
will allow you to access them directly.
GB
7
TV
Display
SUMMARY
with the
tv menu
key and select the
Sound
,
Picture
or
Time
menu. Confirm with
ok
.
SOUND
See page 8.
PICTURE
•
Picture preset
enables you to optimise the picture depending on the kind of
programme you are viewing (Film,Studio,Sport,Standard or Personal).
•
Brightness
,
Colour
,
Contrast
, and
Sharpness
adjust the picture to your
liking.These adjustments are enabled every time you choose Personal (see
above).
•
Contrast expand
adjusts the picture according to the surrounding brightness
(strong or weak).
•
Tone
adjusts the colour balance (warm, neutral or cold).
TIME
•
Sleep timer
sets an interval before the TV/DVD
is automatically put into stand-by.
Set it to
--:-- to cancel.
•
Current time
enables the time to be adjusted if it is not correct.
•
Wake-up timer
enables you to set the time at which you want to be woken
up by the TV/DVD.Tick the box to display the menu options. Key in the wake-
up time. Choose the channel that you want to wake you up.Tick the
Daily
box for a daily wake-up call. Leave the menu with
exit
. Put the TV/DVD into
stand-by with the remote control unit’s
B
B
key.The TV/DVD’s red indicator
flashes.The TV/DVD comes on automatically at the programmed time. If you
do not use the remote control unit it goes off one hour later.
Locking the TV/DVD
: It is possible to prevent the TV/DVD from being turned
on using the buttons on the set.The remote control unit is required for it to be
used.You can lock the TV/DVD in 3 ways:
• by pressing the remote control unit’s stand-by key
B
B
for more than 3 seconds,
• by programming an automatic stop sleep timer (see above),
• by putting it on stand-by after programming a wake-up time.
The flashing red “on” indicator
indicates that the
TV/DVD is locked
. It can only be turned
on by the remote control unit. Press any number key on the remote control unit to unlock it.
Turning the TV/DVD on and off
: the TV/DVD is turned on and off
by pressing the
A
A
key on its front. A
green indicator
on the front
indicates that the TV/DVD is on.
Going to and from stand-by
: switching the TV/DVD on standby is
performed with the key
B
on the remote control.This key allows you
to switch off your TV/DVD with the remote control. The status “
on
standby
” is signalled by the
red indicator lamp
on the front side
of the TV/DVD set.
To switch on your TV/DVD set again, press any of the remote control
number keys or the
ok
key.
When you control the TV/DVD with the remote control unit, the
indicator on the front
flashes orange
.This allows you to check that
the remote control unit is working and the condition of the batteries.
pr +
and
pr -
: to choose a channel with the remote control unit or
with the TV/DVD (Pr 01, Pr 02,… Pr99, AV1,…).
Number keys
: to choose a channel with the 1, 2, 3, etc. keys.
Zoom
: on 16/9 models you are able to enlarge pictures broadcast
in 4/3 or letterbox format (black strips at the top and bottom of the
screen) so as to get rid of areas with no picture. First press
exit
if a
menu is on the screen and select the magnification required with
the
or
keys:
ZOOM 0
4/3 picture (black strips at the sides).
ZOOM 1
for pictures in letterbox centred on the
screen (without sub-titles).
ZOOM 1 (ST)
for pictures in letterbox offset to see sub-
titles.
CINERAMA
4/3 picture Filling the screen.
ZOOM AUTO
Automatic detection of widescreen
letterbox pictures and smooth adaptation
to fill the screen. (this option is offered if it is
validated in the Preferences menu, see page
5).
Display of information
: pressing the
info
key displays on-screen
the number and name of the channel, the time, the zoom and type
of sound. If the channel you are currently watching broadcasts
Program Info, the name of the programme and its start and end time
will be displayed.
Sound and Picture preference
: display the menu with the
red
key
, select the line wanted and adjust to your liking.
List of channels
: press the
list
key on the remote control unit to
display the
LIST
. It contains 10 pages at most and gives the name
and number of each channel.An 11th page is dedicated to equipment
connected via the AV sockets.
To watch one of the channels on the page displayed, key into the
remote control unit the last figure of the channel number (e.g. 5 for
25).The list leaves the screen and pictures from the channel appear.
Leave the menu with
exit
.
PICTURE
Return
Picture preset
Film
Brightness
Colour
Contrast
Sharpness
Contrast expand
Low
Tone
Neutral
TIME
Return
Sleep timer
<I>
--:--
Current time
11:28
Wake-up timer
Wake-up time
07:07
Programme number
08 EURO
Daily
c17-GB-7L 9/10/00 9:46 Page 7