Thomson Neff WIESEL POWERLine WM120, Инструкция по монтажу и обслуживанию

Страница: 49 / 148

0 8/41 Mounting a linear unit
4.4.1 Inductive proximity switches
Inductive proximity switches are used to cut off the electrical drive before the final position is
reached. The necessary stopping distance depends on the speed and the braking effort. This
braking distance must at least end between the switch point of the proximity switch and the
actual, mechanical end of position.
Fig. 6: Inductive proximity switches
No. Name
1
Attachment screw
2
Proximity switch
Determining the final position
The contact surface of the limit switch must be completely covered by the switch flag just
before the sliding carriage reaches the safety zone.
1.
Fig. 6:
Release the proximity switch by loosening the attachment screw (1).
2. Move the proximity switch (2).
3. Fix the proximity switch in position by tightening the attachment screw. In doing so,
ensure that the proximity switch is fully locked into the profile groove.
4. Check the position of the limit switch by turning the screw by hand.
5. If necessary, repeat the procedure.
6. Attach the limit-switch profile cover.
WIESEL POWER Line
®
47