Thomson Neff WIESEL POWERLine WM120, Инструкция по монтажу и обслуживанию

Страница: 45 / 148

0 8/41 Product description
2.3 WIESEL POWER Line
®
WV 60, WV80, WV120
Fig. 3: WIESEL POWERLine
®
WV
No. Name No. Name
1
Sliding carriage
7
Cover strip
2
Scraper brush
3
Tubular section
9
Sliding bar
4
Ball screw
10
Ball nut unit
5
Screw support
11
Bearing housing and fixed bearing
On the
WIESEL POWER Line
®
WV60, WV80, WV120 series, the sliding bars (9) serve only
for the commissioning of the linear axis, when no external forces or moments can occur. This
sizes are designed solely for use as a feeder axis - all external forces and moments must be
taken up by external guides, without which it is not possible to operate.
The sliding carriage (1) is used as assembly and mounting surface for the load to be moved.
The scraper brushes (2) mounted on the sliding carriage remove coarse dirt from the surface
of the tubular section (3).
The tubular section serves as a protection for the ball screw (4) and as a guideway for the
screw supports (5). A flexible cover strip (7) seals the upper tube opening in front of and
behind the sliding carriage.
WIESEL POWER Line
®
43