Thomson Neff WIESEL POWERLine WM120, Инструкция по монтажу и обслуживанию

Страница: 44 / 148

Product description 0 8/41
2.2 WIESEL POWER Line
®
WM 60, WM80, WM120
Fig. 2: WIESEL POWERLine
®
WM 60, WM80, WM120
No. Name No. Name
1
Sliding carriage
7
Cover strip
2
Scraper brush
8
Ball-bearing guided carriage
3
Tubular section
4
Ball screw
10
Ball nut unit
5
Screw support
11
Bearing housing and fixed bearing
6
Guideway
On the
WIESEL POWERLine
®
series, sizes WM60, WM60-370, WM60-500, WM80, WM80-
370 and WM120, an additional ball return guide (8) is integrated in the tubular section.
On the sizes WM60, WM80 and WM120 four ball-bearing guided carriages, on sizes WM60-
370, WM60-500 and WM80-370 two covered ball-bearing guided carriages (8) transmit the
moments from the sliding carriage to the tubular section. The balls run in hardened guide
ducts (6). Lubrication is by central grease nipple and grease ducts (see Chapter 8.1
"Lubrication").
In addition to the limit switches that can be read off by the controls, sizes WM60, WM60-370,
WM60-500, WM80, WM80-370 and WM120 can have adjustable electromagnetic safety limit
switches added on for both end points (see chapter 4.4 "Adjusting the maximum length of
travel").
The sliding carriage (1) is used as assembly and mounting surface for the load to be moved.
The scraper brushes (2) mounted on the sliding carriage remove coarse dirt from the surface
of the tubular section (3).
The tubular section serves as a protection for the ball screw (4) and as a guideway for the
screw supports (5). A flexible cover strip (7) seals the upper tube opening in front of and
behind the sliding carriage.
42 WIESEL POWER Line
®