Thomson Neff WIESEL POWERLine WM120, Инструкция по монтажу и обслуживанию

Страница: 43 / 148

0 8/41 Product description
2.1 WIESEL POWER Line
®
WM 40
Fig. 1: WIESEL POWERLine
®
WM 40
No. Name No. Name
1
Sliding carriage
10
Ball nut unit
2
Scraper brush
11
Bearing housing and fixed bearing
3
Tubular section
12
Guidance system
4
Ball screw
13
Guidance system
5
Screw support
7
Cover strip
On size WM40 of the
WIESEL POWERLine
®
series, the ball return guide (12, 13) is attached
inside the tubular section.
The moment is transmitted via two ball return guide carriages (12) on the guidance system
(13) screwed into the tubular section. Lubrication is by four grease nipples and grease ducts
(see Chapter 8.1 "Lubrication"). The respective end and stop points can be registered via
various measuring systems (rotary transducer, resolver, glass rod etc.).
The sliding carriage (1) is used as assembly and mounting surface for the load to be moved.
The scraper brushes (2) mounted on the sliding carriage remove coarse dirt from the surface
of the tubular section (3).
The tubular section serves as a protection for the ball screw (4) and as a guideway for the
screw supports (5). A flexible cover strip (7) seals the upper tube opening in front of and
behind the sliding carriage.
WIESEL POWER Line
®
41