Thomson Neff WIESEL POWERLine WM120, Инструкция по монтажу и обслуживанию

Страница: 47 / 148

0 8/41 Mounting a linear unit
4 Mounting a linear drive unit
Integrated guideways (WIESEL POWER Line
®
WM)
The linear drive unit is fixed by means of mounting brackets (KAO brackets) fitted to the
aluminium tubular section.
4.1
The tubular section must always be fastened to level surfaces.
Standard parallelism <0.01mm per 100mm.
The linear drive unit must be aligned to comply with the requirements of the intended use.
The following procedure is suggested:
1.
Loosen the relevant mounting bracket.
2. Align the linear unit and/or mounting bracket accordingly, and refasten. If necessary:
3. Loosen other mounting brackets and repeat the procedure.
Fig. 4: Integrated guideways WIESEL POWERLine
®
WM
No. Name
1
KAO bracket
4.2 Mounting over-length linear drive units
1. Remove transport securing piece.
2. Support the joint adequately.
3. Attach the KAO brackets to the right and left of the joint.
Full load moment is possible only when the distance between the KAO brackets ≤ 750mm.
Because the load when placed on top increases the deformation of the aluminium
profile, the distance between the KAO brackets must be reduced in this case.
WIESEL POWER Line
®
45