THK TSC Series, Инструкция по эксплуатации

Страница: 51 / 100

1.
Overview
4-3
4. TSC Functions
TSC
1-1
Type of function mode
TSC have 6 modes for different purposes and objectives.
⿟
The 6 modes have different number of positions, implemented functions, and
operation methods.
⿟ You can change the mode in the parameter No.36 (Function mode).
⿟
While program of each STEP in each mode is configured by the setup tool
D-STEP (the execution from outside will be performed by input/output signals).
For
more information, see the separate setup tool D-STEP Instruction Manual.
Function mode Overview
Number of
steps
Pressing
operation
Multi-point positioning type
0: Position 64 type
Multi-point positioning operation with 64
points
With area output, with P area output
64 ○
1: External unit input instruction
type
Multi-point positioning operation with 64
points
External instruction mode by I/O
Without area output, with P area output
64
－
2: Position 256 type
Multi-point positioning operation with
256 points
Without area output, with P area output
256
○
3: Position 512 type
Multi-point positioning operation with
512 points
Without area output, without P area
output
512
○
Electr
omagnetic
valve type
4: Solenoid mode 1 type
Multi-point positioning operation with 7
points
Direct move command input
With area output, with P area output
7
○
5: Solenoid mode 2 type
Multi-point positioning operation with 3
points
Direct move command input
Position sensor auto-switch output
With area output, with P area output
3 －
1-2
Selection by intended use
Intended use
Mode: 0
Position
64 type
Mode: 1
External
input
instruction
type
Mode: 2
Position
256 type
Mode: 3
Position
512 type
Mode: 4
Solenoid
mode 1
Mode: 5
Solenoid
mode 2
Move and instruction from I/O － ○ － － － －
Brake release from I/O
○ － ○ ○ ○ ○
Pressing operation ○ － ○ ○ ○ －
Torque determination
○ － ○ ○ ○ －
Area output ○ － － － ○ ○
P area output
○ ○ ○ － ○ ○
Signal output during operation ○ ○ － － － －