8. Appendix
8-2
CSKR
8-2
How to replace the sealing sheet
How to replace the sealing sheet is as follows:
Remove the end cover, top cover, and side cover. (See the previous page.)
1. As shown in the figure below, remove the sheet holder from the opposite side of the motor first
and next from the motor side. After that, remove the sealing sheet.
CSKR20 and 26
Sealing sheet
Sheet holder
CSKR33 and 46
Sealing sheet
Sheet holder
2. As shown in the figure below, replace the sealing sheet with a new one, apply locking adhesives
to the mounting hole of the sheet holder on the motor side, and secure it with bolts.
CSKR20 and 26
Sheet holder
CSKR33 and 46
Sheet holder
3. Put the sealing sheet through the slider so that it is positioned as before the replacement.
4. Apply the locking adhesives to the screw hole on the opposite side of the motor, and secure the
sheet holder with bolts, pulling the end of the sealing sheet.
5. Move the slider back and forth for several times, and check if the sealing sheet is not slanted.
Adjust the position of the sealing sheet, retightening the sheet holder.
6. Attach the end cover, top cover, and side cover. (See the previous page.)
Fig. 9 How to replace the sealing sheet
8. Appendix
www.thk.ru
тел. +7(499) 703-39-86
