7. Maintenance
7-2
CSKR
7-2
Precautions to be observed for prevention of product fault or fracture
z
To have this product fully exerts its functions, it is essential to lubricate the product. Be sure to
supply grease on a regular basis.
Using the product with insufficient lubrication may shorten the service life.
z
Do not let foreign material enter the LM guide or ball screw.
Doing so may cause fault, or could adversely affect the performance or service life.
z
Be careful not to let foreign material enter between the sealing sheet and cover.
Doing so may cause fault, or could adversely affect the performance.
z
When you remove the suction joint, be sure to turn off the power supply and stop the supply voltage
first, and check that fluid in the piping has come out.
z
After mounting, wiring, and pipework, pass fluid or connect power supply, and perform an
appropriate function test and leak test. If you find any leaks or the devices not functioning properly,
do not use the product and make sure that the parts are mounted correctly,
or it may lose the cleaning performance.
z
Do not mix different types of greases (fluorine, lithium series, etc.)
It may lose the original lubrication performance or generate gas to lose the cleaning performance.
z
Do not forcibly press nor damage the sealing sheet when supplying grease.
It may lose the cleaning performance.
z
Do not loosen nor remove bolts other than ones specified.
It may cause fault or fracture, or lose the cleaning performance.
7. Maintenance
www.thk.ru
тел. +7(499) 703-39-86
