6. Installation and
Operation
6-2
CSKR
6-2
Precautions to be observed for prevention of product fault or fracture
z
Since using an adverse service environment may cause fault, use the product in the environment
described below.
•
Place at the following storage temperature range
If the clean-room level of class 4 performance is required
Service temperature: +16°C to +24°C (no condensation at the humidity of 50% or less)
Places other than above
Service temperature: +10°C to +40°C (no condensation at the humidity of 80% or less)
* If you desire to use the product outside of the service temperature range, contact THK.
•
Place with non-corrosive gas nor flammable gas
•
Place with no dust, salt or metallic powder
•
Place where water, oil or chemical can not contact the product
•
Place where a vibration or shock does not transmit to the main unit
z
Prevent foreign material such as dust or metallic powder from entering the product since it may
cause abnormal wear or shorten the service life.
If foreign material may enter the product, contact THK.
z
The mounting surface for this product must be a machined plane or have accuracy equivalent to
the machined plane. If the surface is insufficiently accurate, it may adversely affect the performance
or the service life. In addition, be sure to mount the product on a sufficiently rigid base.
z
Use the product within the stroke range.
* For more information on the stroke, see the general catalog of the electric actuators.
z
Be careful not to let the parts to be mounted on the slider of this product interfere with any other
parts near the stroke end.
z
Check that there is no tool or bolt in the product before operating it.
z
The stoppers attached to both stroke ends of CSKR are not for positioning.Do not use them for
positioning.
z
The standard models contain the THK AFE-CA grease.
z
The photomicro sensors do not have a waterproof or dustproof structure. Do not use it in a place
where much dust or oil mist is present, or where water, oil or chemical directly or indirectly flies.
For other detail information, see the catalog issued by the sensor manufacturer.
* Standard sensors
•
EE-SX671, EE-SX674: OMRON Corp.
6. Installation and Operation
www.thk.ru
тел. +7(499) 703-39-86
