6. Installation and
Operation
6-3
CSKR
6-3
Other precautions
z
If using proximity sensors close to each other, they may interfere with each other. To avoid such
mutual interference, consider taking appropriate measures such as keeping a sufficient distance
between the sensors and using sensors of different frequencies.
For details, see the catalog issued by the sensor manufacturer.
z
If a stainless steel sensor dog is used when a proximity sensor is used, note that the detection
distance is shorter than that of an iron dog.
For details, see the catalog issued by the sensor manufacturer.
* Standard sensors
•
APM-D3A1F, APM-D3B1: YAMATAKE Corp.
•
GL-N12F, GL-N12FB, GX-F12A, GX-F12B: Panasonic Industrial Devices SUNX Co., Ltd.
z
For selection and handling of a motor, see the respective catalog and instruction manual issued by
the motor manufacturer.
For data required to select a motor, see the general catalog of the electric actuators.
z
For selection, handling and mounting of a coupling, see the respective catalog issued by the
coupling manufacturer.
Check necessary data such as permissible torque, eccentricity, deflection angle and tightening torque of the
assembly bolt.
z
For handling and mounting of a suction joint, see the respective catalog issued by the joint
manufacturer.
z
For selection and mounting of a tube, see the respective catalog issued by the joint manufacturer.
6. Installation and Operation
www.thk.ru
тел. +7(499) 703-39-86
