THK 9x0 Series, Руководство пользователя

Страница: 50 / 59

9x0 Series Series
Page 52
Sequence Setting
Click the Edit button of Sequence Setting to open the Sequence setting menu.

Sequence Line
Select the number of the Sequence Line to be set from the drop-down list at the top of the Sequence setting
menu.

Sequential Preset Points Setting
Set the Preset Points of the configured Sequence Line one after the other. Select a Preset Point from the Name
list for the specified number of the Preset Point and enter the Dwell Time (0 to 127) and the Speed (0 to 14) in
the corresponding fields.
After setting the sequential Preset Points, click the Save button in the Sequence setting menu.
Sequence Run
Select the configured Sequence Line from the drop-down list and click the Go button. The camera will start moving
forward each scene sequentially as programmed.
To view the camera executing a Sequence Line in full screen mode, move the cursor to the live view pane, right-click
and left-click to select
Fullscreen . You can now view the camera navigation in full screen.
To stop running the Sequence Line, simply move the cursor to the live view pane and move the camera in any
direction.
3.5.3 Pan/Tilt Control
The Pan/Tilit Control page serves to activate the pan/tilt function and select the RS-485 protocol used by the
Joystick/Keyboard.
RS-485 Protocol Type
With the correct RS-485 protocol selected, you can remotely control the pan/tilt function of the camera using a
Joystick/Keyboard. Check the RS-485 protocol type of the Joystick/Keyboard. Then select the RS-485 protocol used by
the Joystick/Keyboard from the drop-down list. The available protocols are
DSCP , PelcoD , PelcoP and Diamond . After
the protocol type has been selected, adjust the parameters from the drop-down lists on the right. Click the Save
button to confirm the settings.
3.6 Logout
Select the Logout tab at the top of the page to open the Login window. This window enables you to log in with
another username.