9x0 Series Series
Page 34
Sort
Click the
Sort
button, and the files in the Recording list will be listed in name and date order.
The capital letter A / M / N / R / V / U at the beginning of the name denotes the type of recording (see below).
Initial
Recording type
Initial
Recording type
A
Alarm
R
Regular recording
M
Motion
V
Manual trigger
N
Network failure
U
Audio detection
Download
To open/download a video clip, select the file first, and then click the
Download
button below the Recording list
field. The selected file window will pop up. Click the AVI file to immediately play the video in the player or
download it to a specific location.
3.2.9.2 Network Share (NAS)
You can store the recording videos to a network shared-folder or to the NAS (Network-Attached Storage). A NAS
device is used for data storage and data sharing via the network. This page displays the capacity information of the
network device and a recording list with all the recording files saved to the network device. You can also format the
NAS and implement automatic recording cleanup on this page.
Device information
If a NAS is successfully installed, the device information such as the memory capacity and status will be shown in this
section.
Storage setting
You can set the camera to send the alarm messages to a specific NAS site when an alarm is triggered. Enter the
network device details, including the host (the IP of the NAS), share (the folder name of the NAS), username and
password, in the relevant fields.
Click the
Save
button to confirm the settings.
Storage Tools
Click the
Format
button to format the NAS.
Recording Source
Select a video stream as the recording source. The default format of the video stream is
Stream
1. Select the desired
stream from the drop-down list.
Click the
Save
button to confirm the selection.
Disk clean-up setting
Check
Enable automatic disk cleanup
and specify the time
1~99 day(s) or 1~142 week(s)
and storage limits
1~99%
ful
l.
Click the
Save
button to confirm the settings.
Recording List
Each video file on the Network Share will be listed in the Recording list. The maximum file size is 60 MB per file.
When the recording mode is set to
Always
(consecutive recording) and the NAS recording is also allowed to be
enabled by events triggered, once events occur, the camera will immediately implement event recording to the
memory card. After recording of the events, the camera will return to the regular recording mode.
Remove
To remove a file, select the file first, and then click the
Remove
button.
Содержание 9x0 Series
