THK 9x0 Series, Руководство пользователя

Страница: 16 / 59

9x0 Series Series
Page 16
Install Signed Certificate
Click the Create Certificate Request button to create and submit a certificate request in order to obtain a signed
certificate from a CA.
Provide the requested information in the create dialog. Refer to Provide the Certificate Information below for more
details.
When the request is complete, the subject of the Created Request will be shown in the field. Click the Properties
button below the Subject field, copy the PEM-formatted request and send it to the selected CA.
When the signed certificate is returned, install it by uploading the signed certificate.
Provide the Certificate Information
To create a Self-signed HTTPS Certificate or a Certificate Request to a CA, enter the information as requested.
Create Self Signed Certificate Create Certificate Request
Country V V
State or province V V
Locality V V
Organization V V
Organizational unit V V
Common name V V
Valid days V V

Country
Enter a two-letter code to indicate the country the certificate will be used in. For instance, enter
US to indicate
the United States.

State or province
Enter the local administrative region.

Locality
Enter other geographical information.

Organization
Enter the name of the organization to which the entity identified in
Common Name belongs.

Organization Unit
Enter the name of the organizational unit to which the entity identified in
Common Name belongs.

Common Name
Indicate the name of the person or other entity that the certificate identifies (often used to identify the
website).

Valid days
Enter the period in days (1 to 9999) to indicate the valid period of certificate.
Click the OK button to save the Certificate Information after completing the setting.
3.2.2.3 Ip Filter
With IP Filter, you can allow or deny specific IP addresses to access the camera.

Enable IP Filter
Check the box to enable the IP Filter function. When enabled, the listed IP addresses (IPv4) in the
Filtered IP
Addresse s list box will be allowed/denied access to the camera.
Select Allow or Deny from the drop-down list and click the Apply button to define the IP filter behavior.

Add IP Address
Enter an IP address in the blank space below the Filtered IP Address list and click the
Add button. The
newly-added address will be shown in the list. Up to 256 IP address entries can be specified.
In addition, to filter a group of IP addresses, enter an address at the blank space, followed by a slash and a
number ranging from 1 to 31, e.g. 192.168.2.81/30. The number after the slash denotes how many IP addresses
will be filtered. For details, see the following example.