Thies CLIMA DLx-MET, Инструкция по эксплуатации

Страница: 43 / 56

5.5 FORMAT OF THE COMMANDS
The following commands operate with the serial interfaces COM1 and USB of the datalogger.
The commands are 4 to 12 bytes long:
STX ? ? ? ? ? ? ? ? ? ? ETX
Command:
2 ... 10 Bytes
End of command:
0x03(Hex) / Ctrl-C
Begin of command:
0x02(Hex) / Ctrl-B
LIST OF THE COMMANDS:
"HH" Help: indicates the list of entering commands
“PD“ Turn Datalogger into “power down” (display off, Measuring-Mode)
“RS” Reset of the Datalogger. Start of Bootloader
„CC1“<0..9>
“CC2”<0..9>
“CC3”<0..9> Set baud rate COM1
Set baud rate COM2 0:300Bd … 5:9600Bd … 9:115200Bd
Set baud rate COM3
„CR“<n><0,1> Set operation mode COM n(n = 1,2) 0:RS232 1:RS485-4w
“Cs000 ”aaa’ ‘bbb Configure sensor or telegram for COM2 and COM3
aaa:COM2 bbb:COM3 values according to index in
Table 5
Example: STX “Cs000 008 001”ETX
COM2: 8 (-> SIF002) COM3: 1 (-> SONIC)
Ref. to chap.
3.2.5
for additional remarks.
Old data can be deleted
!
„MT“<01s,02s,03s,04s,05s,06s,10
s,12s,15s,20s,30s,01m,02m,03m,
04m,05m,06m,10m,12m,15m,20
m,30m,60m>
Set measuring cycle in seconds or minutes
„ST“<01m,02m,03m,04m,05m,06
m,10m,12m,15m,20m,30m,60m>
Set mean storing cycle in minutes
„ET“<01m,02m,03m,04m,05m,06
m,10m,12m,15m,20m,30m,01h,0
2h,03h,04h,06h>
Set extreme storing cycle in minutes and hours
„SS“ Output of all stored mean values
„GS“ Complete mean memory:
Reasonable only, when the logger has re-initialised itself, in order to
save data which have not been overwritten
“EE” Output of all stored extreme values
"TS"<DdMoYy>
“ts”<d><m><y> Stored mean data of one day
Description of parameters: ref. to chap.
5.5.1
„DS“<DdMoYyHhMi>
“ds”<d><m><y><h><m> Output of stored mean data from a specific time
Description of parameters: ref. to chap.
5.5.1
"TE"<DdMoYy>
“te”<d><m><y> Stored extreme data of one day
Description of parameters: ref. to chap.
5.5.1
43 - 56 021579/06/09