Thies CLIMA DLx-MET, Инструкция по эксплуатации

Страница: 11 / 56

2.1.2 Mast-installation for case version B
The following instructions are only valid for case version B (9.1756.
0
0.x0x).
1. Cut two piece in the requested length of the guy rope (1 meter) according to
table (see
Table 1
).
2. Insert the strap into the housing from the screw head side, and bend a projection of
20mm over the ridge (see
Figure 8
).
3. Put the free end of the prepared clamp around the mast and the mounting angle, and
screw it on (see
Figure 9
).
Length of Guy Rope
4. Two straps are provided for the datalogger.
Figure 8: Strap Housing
11 - 56 021579/06/09
Mast Ø
Guy Rope
Mounting angle
Figure 9: Mast with guy rope
Mast Ø Length of Guy Rope
48 mm / 1.9 inch
60 mm / 2.4 inch
80 mm / 3.2 inch
90 mm / 3.5 inch
102 mm / 4 inch 250 mm / 10 inch
310 mm / 12.2 inch
370 mm / 14.6 inch
400 mm / 15.8 inch
440 mm / 17.3 inch
Table 1: Length of guy rope