Ver02
17.11.2014
15
4)
Pressing
“scroll” button, you may circu
late all messages from the first one to the last
one then returns back to the first one
.
5)
All alarm codes are present when abnormal behavior(s) occur(s).
The display value of the above parameter will update within 0.2s
.
4.4 Parameters
setting
The setting function is controlled by 3 buttons (Enter (, Off
▲
,
On
▼
):
Enter (---goes into the setting page and value adjustment;
Off
▲
&
On
▼
---for choosing different pages.
After the UPS turn ON, press buttons ( &
▲
for
3 seconds and then goes into the setting
interface page. After finishing setting the parameter,
press “ON” until exiting out of
the
current interface.
Note: After entering the setting interface, it will exit when without operation in 30s.
4.4.1 Mode setting
Input
Mode setting
(Note: Inside the broken-line is the flashing part
)
After entering the setting
menu, it’s mode
setting defaulted, and the mode setting line
flashing as in above picture.
ķ
Use button Enter
3
to choose different mode. There are 3 different modes for setting:
ECO, PAL, NOR
㸹
ĸ
Press
▲
or
▼
to exit the mode setting
(save the mode setting), and goes to output voltage setting or parallel redundancy quantity
setting
4.4.2 Output voltage setting
Input
Output voltage setting
(Note: Inside the broken-line is the flashing part.)
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK