Operation/installation/service manual
MACERATOR TOILETS
Manuale di utilizzo / installazione / manutenzione
TOILET MACERATRICI
X-light / Privilege/ Evolution/ Breeze/ E-Breeze/ Silence Plus 2G/ Elegance 2G
54
TECMA SRL – Via Flaminia / Loc Castel delle Formiche/ 05030 Otricoli (TR) / Italy-
rev 1.2017
1111111111111111
111111111111111111111
-
Only use stainless steel hardware. Always use the supplied ceramic-protection rubber
inserts. Any toilet assembly errors may result in improper movements, which may
damage objects or injure persons.
-
The toilet is designed to dispose of human waste and toilet paper. Never flush other
materials types (e.g. paper towel, wet wipes, condoms, sanitary pads, dental floss, etc.)
-
Always use the screw caps, ceramic-protection rubber inserts, and connectors supplied
with the toilet.
-
If in doubt, please refer to your TECMA distributor.
WARNING:
Flush toilet paper only.
3.1 Installation site
Tecma toilets are designed for installation against the wall. This is to ensure the toilet stability,
optimize space and bathroom design . For hygiene purposes, it is recommended to use sealant
around the toilet base.
Before starting installation:
-
make sure that the blackwater tank is in a suitable position and can be reached from the
toilet installation site
-
make sure that the toilet configuration corresponds to the hydraulic and electric system
of the boat.
-
make sure that the chosen model is suitable for the installation into, taking into
consideration:
the foot overall dimensions
correct seat cover opening
there is sufficient space to fit all the pipes without damaging or bending them
inappropriately.
the floor plate can withstand the weight of the toilet and of a potential user, even during
sailing, when these loads may be greater due to the pitching and rolling of the boat.
If recommended, there is any space to install a separate ventilated siphon sufficiently
above the toilet. This installation is recommended in the cases described in section 3.8
"System" The Flexi 2G line integrates an air admittance valve already in the discharge
internal hose.