Operation/installation/service manual
MACERATOR TOILETS
Manuale di utilizzo / installazione / manutenzione
TOILET MACERATRICI
X-light / Privilege/ Evolution/ Breeze/ E-Breeze/ Silence Plus 2G/ Elegance 2G
50
TECMA SRL – Via Flaminia / Loc Castel delle Formiche/ 05030 Otricoli (TR) / Italy-
rev 1.2017
1111111111111111
111111111111111111111
Fig.1
Fig.2
Change flushing mode
–
from mooring mode to sailing mode (Fig.2)
If you have already adjusted the amount of water and now want to go back to sailing mode:
1)
Press and hold the BEFORE USE and AFTER USE buttons for approximately 3 seconds.
2)
Release both buttons as thelock LED will flash
3)
The system is now set to sailing mode
NOTE
: at the end of the cycle, the toilet remains empty if the system is set in “
sailing mode
”.
Alternatively, a small amount of water remains in the toilet if the system is set in “
mooring mode
”.
SAILING
MODE
MOORING
MODE
SAILING
MODE
Press and hold for about 3 sec
Lockout LED starts blinking
Keep pressing and holding for
about 4 sec
Water starts coming in
Keep pressing and holding the
buttons and release them when
the desired amount of
water is in
the bowl
MOORING
MODE
Release as soon as the lockout
LED starts blinking
Press and hold for about 3 sec
MOORING
MODE
SAILING
MODE
SAILING
MODE