ThermoTec LCSPI-120, Руководство по эксплуатации и установке

Страница: 4 / 20

Page 3
-Be sure to read the following WARNING before installing the unit.
-After reading these instructions retain for future reference.
Installing the Unit.
Incorrect installation could cause injury due to fire, electric shock or water damage. If in doubt
consult your local dealer or a qualified installer.
Securing the Unit.
The unit should be located on a solid, level, horizontal surface and securely fixed. Ensure free
air-flow to all sides of the unit.
Electrical Connections.
Ensure the correct sized Circuit Breakers, isolators and cables are used. All terminals
should be tightly secured and not prone to stress.
This unit must be earthed.
Materials.
To prevent fire, electric shock and other hazards all materials should be suitable for the
specific use of this unit.
Never use an extension cable to connect the unit to the electric power supply.
If there is no suitable earthed supply available, have one installed by a qualified electrician.
Do not move/repair the unit yourself.
Before carrying out any maintenance, service or repair work, the product must be isolated
from the mains electrical supply. To prevent possible injury, only qualified engineers should
carry out these works.
Do not install the unit in a place where there is a chance of flammable gas leaks.
If there is a gas leak and gas accumulates in the area surrounding the unit, it could cause an
explosion.
Water Connections.
All plumbing connections should be carried out as per the instructions in this manual. Failure to do
so could result in water damage to property.
Cleaning the Unit.
To prevent injury always shut the power ‘OFF’ when cleaning or servicing the unit.
Error Codes.
If an error code occurs or you can smell burning, isolate the unit immediately and call your local
installer.
Avoid contact with the fan when running as this will cause serious injury.
RENEWABLE HEATING & COOLING TECHNOLOGY
CAUTION
WARNING
!
!