THERMOSALD UPSCR_N_V5 - OPERATOR MANUAL - Rev. 2006 / 07
Page N. 2
- Tot: 18
MAINTENANCE & OPERATIONS MANUAL:
cod. UPSCR_N_V5_MOP_2001/06
0
WARNINGS
0.1
SAFETY PRECAUTIONS
- Never use the equipment in explosive atmospheres or with explosive materials.
- Never use the equipment with flammable material without first taking the
required safety precautions.
- Never turn on the temperature controller power circuit when the safety guards are
open.
- Do not use the temperature controller for tasks other than those it is designed for
i.e to control the temperature of bands or wires for industrial-grade sealing.
Contact our engineering department for information regarding specific
applications.
- Do not deliver electrical power to the temperature controller if the protective
cover has been removed for special servicing on the electronic system.
- Operate the equipment by following the instructions contained herein.
- Employ qualified and well-trained personnel, familiar with the technology used
to install the equipment and put it into service.
- Use bands or wires having an adequate positive temperature coefficient ( > 1 x
10E-3)
- When the machine is running under normal conditions, make sure the heat sink of
the controller does not exceed 60°C . If this happens, increase heat sink
ventilation or contact our engineering department.
