THERMOSALD UPSCR Series, Руководство оператора

Страница: 17 / 18

THERMOSALD UPSCR_N_V5 - OPERATOR MANUAL - Rev. 2006 / 07
Page N. 17
- Tot: 18
ANNEX G – START UP CARD – PAG. 1
COMMERCIAL NOTE
MODEL OF MACHINE:
CUSTOMER:
BAND POSITION:
KIND OF FILM TO SEAL:
THICKNESS OF FILM TO SEAL:
APPLICATION NOTE
Band material
= _______________________
Band form profile = _______________________
Width of the band = _______________________ [mm]
Thickness of the band = _______________________ [mm]
Length overall = _______________________ [mm]
Copper/Silver ends = _______________________ [2 x mm]
Copper/Silver in the centre = _______________________ [mm]
Teflon coat in the centre = _______________________ [mm]
Type of connections (Parallel/Serial) = _______________________ [P/S]
TECNICHAL NOTE
RESISTANCE OF THE SEALING
= _______________________ [
Ω
]
RATED CURRENT OF THE THERMOSALD = _______________________ [30/60/90 A]
SECONDARY VOLTAGE OF THE TRANSFORMER = ______________________ [V]
MODEL OF THE THERMOSALD
= _______________________ [UPSCR_M_V4_……]
DIP SWITCH TABLE
SW + SW-
1 2 3 4
ON
OFF
1 2 3 4
ON
OFF
USE FACTOR
= _____________
PRE-HEAT TEMPERATURE
= _____________ [°C]
SEALING TEMPERATURE = _____________ [°C]
SEALING TIME (SET INTO THE PLC) = _____________ [Sec.]