Temp
Control
|
15
14
|
Temp
Control
THX-DL Operation
THX-DL Operation
4.0 SETTINGS
4.1 Set Clock
From the Main Screen, press the key to select Settings from the main menu.
Confirm selection using the key to reveal the Settings Menu. Select Set Clock from the menu and press the key to confirm.
The Set Clock screen allows the user to change the time and date settings of the unit.
The highlighted parameter is adjusted by pressing the or key. The parameters are Year, Month, Day, Hour and Minutes.
To change any of these, press the or key. Press the key to confirm the changes and back to the previous screen.
4.2 Alarm Mute Setup
From the Main Screen, press the key to select Settings from the main menu.
Confirm selection using the key to reveal the Settings Menu.
Select Alarm Mute Setup from the menu and press the key to confirm.
The Alarm Mute Period for all channels ranges from 0 to 95 minutes. If any key is pressed during an alarm situation for a channel,
the buzzer will be muted for this period. The default alarm mute period is 5 minutes.
In order to change the alarm mute period for any channel, move to the required channel by using the or key
to increase the alarm mute period, press the key. To decrease, press key.
If a channel is switched off, the alarm parameters will automatically revert back to the default factory settings to prevent an alarm
occurrence. These parameters cannot be changed until the sensor input is switched on again.
4.3 Channel On/Off
From the Main Screen, press the key to select Settings from the main menu.
Confirm selection using the key to reveal the Settings Menu. Select Channel On/Off from the menu and press the key to confirm.
Each sensor channel can be switched on or off. By default, all channels are on. If a new module in inserted the default mode for the new
channels will be on. When the sensor input is switched on, the actual reading will be monitored every 15 minutes (default sample period).
If the sensor input is switched off, the unit will display OFF.
To switch channel off, press the key. To switch the channel back on, press the key.
4.4 Sensor Type
From the Main Screen, press the key to select Settings from the main menu.
Confirm selection using the key to reveal the Settings Menu. Select Sensor Type from the menu and press the key to confirm.
The 12 sensors inputs can be configured to read either Temperature or Relative Humidity. As a factory default, all 12 sensor inputs are
configured to accept temperature sensors.
To change the sensor input configuration to Humidity, press the key. To change it back to Temperature, press the key.
OK
OK
OK
OK
OK
OK
OK
OK
OK
▲
▼
▼
▼
▼
▼
▲
▼
▲
▼
▼
▼
▲
▼
▲
▼
