Temp
Control
|
27
26
|
Temp
Control
USB
Web Server
2. Download Setup
From the Main Screen, press the key, followed by the key to select Download Setup in the menu and then confirm selection
using the key to start download the settings. Do not remove the memory stick until the progress bar disappears.
The data is saved to a file in ‘setup.txt’ format.
3. Upload Setup
From the Main Screen, press the key, followed by the key to select Upload Setup in the menu and then confirm selection
using the key to start upload previously downloaded settings from the memory stick. Do not remove the memory stick until the
progress bar disappears.
4. Service
For use only by authorised personnel and trained installers.
OK
OK
OK
▼
OK
▼
To connect with unit’s embedded Web Server, connect unit to the network (switch, hub, router etc.) using Ethernet CAT-5 cable or directly
to the network adapter on your computer and open a web browser - Windows Internet Explorer (version 8.0 or higher) or Firefox. Input the
unit’s IP address (default -192.168.0.2), see section 4.10.
Network connection
Direct connection
Enter the username and password (as provided below).
Default username and password:
User: user
Password: password