background image

P a g e

 | 

15 

 

17/03/11 

 
 
 
 
 
 
 
 
 
 
 
 

 
 

 

PRODUCT WARRANTY 

 
 

  This warranty is limited to goods purchased and installed in *Australia. 

Twelve (12) months full warranty on parts and labour by Thermoline Scientific 
through its authorised dealers or service organisations, will repair or at its 
option replace any part found to contain a manufacturing defect in material or 
workmanship without charge to the purchaser for parts, service labour or any 
necessary shipping or cartage costs for parts only. Replacement or repaired 
parts will be warranted 

only

 the 

unexpired

 portion of the original warranty. 

This warranty does not apply to damage caused by accident, misuse, fire, 
flood, or acts of God. It does not apply to damage caused from failure to 
properly install, operate or maintain the goods in accordance with the printed 
instructions provided. To obtain prompt warranty and service, simply contact 
Thermoline Scientific. 

 
 

  If warranty service is required, Thermoline Scientific will endeavour to have 

an authorised service organisation carry out the work if there is an available 
agent, however if it is decided to return the equipment to our main workshop 
then it is the customers responsibility to pay the freight cost of this return, 
Thermoline Scientific, after the repair, will return the goods at our cost, to the 
customer. 
The customer should always contact Thermoline Scientific for approval to 
return and seek advice as to the best and most cost effective method of 
return. 

 

 

 

*Export Warranty:

 Limited to the replacement of 

Parts Only

. Supplied Ex 

Factory, Australia. 

 

 

Limitation of Liability:

 Except to the extent not permitted by law, Thermoline 

Scientific excludes all warranties, conditions and terms implied by law. If any 
implied warranty, condition or term does exist, Thermoline Scientifics’ liability 
for breach of that implied term is limited, at the option of Thermoline Scientific, 
to replacement or repair of goods or part thereof, or payment of the cost of 
repairing or replacing the goods or any part of the goods. 

Содержание TI-150F

















Отзывы: