Thermoline Scientific Equipment TI-150F, Руководство по эксплуатации

Страница: 10 / 16

P a g e | 10
17/03/11
2.
Use the “Scroll” key to select in turn the “ tsp.1 ” parameter (Target set point 1),
the “ RMP.1 ” parameter (Ramp rate 1), and the “ DWEL.1 ” parameter (Dwell time
1). Use the raise or lower keys to set the parameters shown below.
TSP.1 (Target set point 1)
RMP.1 (Ramp rate 1)
Note with RMP.1 = OFF the temperature will rise
from ambient to 35ºC as quickly as possible.
DWEL.1 (Dwell time 1)
3.
As for segment 1 described above use the “Scroll” key to select in turn the
“
tsp.2 ” parameter (Target set point 2), the “ RMP.2 ” parameter (Ramp rate 2),
and the “ DWEL.2 ” parameter (Dwell time 2). Use the raise or lower keys to set
the parameters shown below.