THERMOBILE IMAC 2000 PELLET, Руководство пользователя, Страница: 16 / 24

THERMOBILE INDUSTRIES BV
INSTRUCTIONMANUAL PELLETHEATER
16
7 SPARE PARTS
We advise you to keep spare parts in stock. See the service manual for details.
8 TECHNICAL INFORMATION
• For technical specifications, refer to table A in the Appendix at the back of this
manual.
9
INSTALLATION OF ACCESSORIES
9.1 Exhaust air fan (Fig. 8)
The convector heater has to be connected to the exhaust air fan.
1. Slide the exhaust air fan in to the heat exchanger.
Caution
The flue should point upward. Do not let the flue point sideways. An angle of 45° is
acceptable; the length of the flue should be at least 1000 mm.
2.
Place a rain cover (A) on the end of the flue.
9.2 Container 10ft and Pelletstorage (between-container ) (Fig. 13)
Pellets can be filled by a truck in the 10ft container. The 10ft container should be placed near
the road so it can be easily reached by the filling truck. The 10ft container is connected to the
Pelletstorage. The maximum distance between them is 20meters. It is important that the
Pellet storage is leveled correctly.
9.3 Ashcontainer (Fig. 11)
Set the Ashcontainer correctly.
9.4 Pellet transport hose and Pellet connection hose. (Fig.12,13,14 )
Between the 10ft container and the pellet storage the Pellet transport hose is connected.
This is a firm hose that can’t be blocked easily. The Pellet storage and the heater are
connected through the pellet connection hose this is a special melting hose the will melt
incase a fire occurs.
9.5
Air hose
Hoses may be connected to the exhaust opening of the convector heater to convey hot air
elsewhere.
Caution
Check the temperature resistance of the hose used.
Contact your dealer for information about the maximum resistance and the diameters of the
exhaust hoses, bends, manifolds and hose clamps.
9.4 Diameters of exhaust hoses
The outlet diameter of the IMAC 2000 s Pellet is Ø500mm.
9.5 Room thermostat
Refer to the instructions of the thermostat.
10 EC DECLARATION OF CONFORMITY
For the EC declaration of conformity, go to www.thermobile.nl.