Thermo Scientific
Warnings, safety, and warranty information
WARNING: Use appropriately-rated equipment and qualified
operators for lifting and moving the Smartainer 3.0.
The use of unsuitable equipment or procedures can cause damage to
property, in addition to personal injury or death.
WARNING: Potential confined space.
Operators may enter larger Smartainer 3.0 units. Evaluate this
equipment against your confined space standards and procedures.
WARNING: Do not drill, cut, weld, or otherwise apply high heat
to the Smartainer 3.0.
Doing so can weaken the structure, resulting in damage to property, in
addition to personal injury or death.
WARNING: Burst hazard—air under pressure.
The BPC chamber is under slight pressure under normal operating
conditions. Normal passive venting prevents any excess of pressure
building up within the chamber. Chamber pressure and inlet line
pressure should be monitored for proper settings.
• BPC pressure should not exceed 0.03 bar (0.5 psi).
• Inlet BPC pressure should not exceed 0.34 bar (5 psi).
WARNING: Use ladders and elevated platforms with caution.
A few operations, such as adjusting a BPC during filling into a large
Smartainer, may require the use of a ladder or platform. Before use,
ensure the ladder has been inspected and weight-rated for its user.
When using a ladder or platform, be sure it is stable, maintain three
points of contact, and make sure the steps are clean.
WARNING: Pinch hazard.
The Smartainer hoist can be manually raised and lowered. Caution
should be used to avoid pinching an operator or causing damage to
the equipment or the BPC.
WARNING: Hot surface—do not touch.
The heating jacket is designed to heat the inner vessel wall. Normal
operating conditions generate heat and could create hot surfaces.
• Hot surface inside.
• Contact with surfaces may cause burns.
• Do not touch while in operation.
HyPerforma Smartainer 3.0 User’s Guide
|
2
