Thermo Scientific ThermoFlex10000 Скачать руководство пользователя страница 21

Страница: 21 / 210

Thermo Scientific

ThermoFlex 1-1

Make sure you read and understand all instructions and safety precautions

listed in this manual before installing or operating your chiller. If you have

any questions concerning the operation or the information in this manual,

please contact us. See inside cover for contact information.

DANGER

indicates an imminently hazardous situation which, if not

avoided,

will

result in death or serious injury.

WARNING

indicates a potentially hazardous situation which, if not

avoided,

could

result in death or serious injury.

CAUTION

indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury. It is also be used to alert

against unsafe practices.

The lightning flash with arrow symbol, within an equilateral triangle, is

intended to alert the user to the presence of non-insulated "dangerous

voltage" within the chiller's enclosure. The voltage magnitude is significant

enough to constitute a risk of electrical shock.

This label indicates read the manual.

Performance of installation, operation, or maintenance procedures

other than those described in this manual may result in a hazardous

situation and may void the manufacturer's warranty and safety

compliance.



Observe and never remove warning labels.



Never place the chiller in a location where excessive heat, moisture,

or corrosive materials are present.



The chiller's construction provides protection against the risk

of electrical shock by grounding appropriate metal parts. The

protection will not function unless the power cord is connected to a

properly grounded outlet. It is the user's responsibility to assure a

proper ground connection is provided.



Never operate equipment with damaged power cords.



For ThermoFlex900-10000 chillers, the circuit protector located on

the rear is not intended to act as a disconnecting means.



Safety Warnings

Section 1

Safety

DANGER

WARNING

CAUTION

Содержание ThermoFlex10000



















































































































































































































Результаты поиска

Содержание ThermoFlex10000

Отзывы:

Похожие инструкции для ThermoFlex10000

Бренды по названию

Популярные бренды

Thermo Scientific ThermoFlex10000, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание ThermoFlex10000

Отзывы:

Похожие инструкции для ThermoFlex10000

Бренды по названию

Популярные бренды