Thermo Scientific Thermo Scientific Vanquish VC-D40, Руководство по эксплуатации

Страница: 69 / 174

5 • Installation
Variable Wavelength Detectors (VC-D40, VF-D40)
Operating Manual Page 69
In addition, observe the guidelines for proper connection of the flow cell
in
General Information and Guidelines (
}
page 62) .
Parts required
• Inlet capillary
• Detector waste line
For instructions on connecting the waste line, follow the steps in
Connecting the Detector Waste Line ( } page 71) .
Tools required
For the detector waste line: Tubing cutter (optional)
Preparations
TIP For easier guiding of capillaries to the flow cell inlet, remove the
right door of the detector, see Replacing the Doors (
}
page 126) .
1. Flush the system modules and capillaries upstream of the device to
waste before you connect the flow cell to the system flow path.
Refer to the
Vanquish System Operating Manual .
2. On the flow cell, remove the plugs from the flow cell inlet and
outlet.
TIP Store the plugs of the flow cell, for example in the flow cell
packaging, to have them easily available when storing or shipping the
flow cell.
3. Install the partition panel plugs (if not present yet). See Installing the
Partition Panel Plugs ( } page 65) .
Follow these steps
1. Connect the inlet capillary to the flow cell.
2. Connect the detector waste line to the flow cell.
See also
2 Connecting the Inlet Capillary ( } page 70)
2 Connecting the Detector Waste Line ( } page 71)