Thermo Scientific Super-Nuova S133320-33, Инструкция по эксплуатации и список запасных частей

Страница: 9 / 33

9
unpacking
remove your Super-Nuova stirrer from the carton.
Inspect to ensure that the unit has not been damaged
during shipment. If the unit appears to have sustained
shipping damage contact the distributor from whom you
purchased this product or Customer Service at:
North america : uSa/1 866 984 3766 (866-9-
THerMo) www.thermo.com
europe: a43 1 801 40 0, B32 2 482 30
30, 33 2 2803 2180, Germany national toll free
08001-536 376, Germany interna49 6184 90
6940, Italy +39 02 02 95059 434-254-375, Netherlands
+31 76 571 4440, Nordic/Baltic cou358 9 329 100,
russia/CIS +7 (812) 703 42 15, Spain/po34 93
223 09 18, Switz41 44 454 12 12, uK/I44
870 609 9203
asia: China +86 21 6865 4588 or +86 10 8419 3588,
India toll free 1800 22 8374, India +91 22 6716 2200,
Japan +81 45 453 9220, other asian cou852
2885 4613
Countries not listed: +49 6184 90 6940 or +33 2 2803
2180
Check for stir bar and thumbscrew prior to discarding
packaging.
The following items are included in the shipment:
Super-Nuova Stirrer
Stir Bar - ZSX65a
adapter (100v models only) - CeX42
Knob - KBX106
operator’s Manual - LT1333X1
If any of these items are missing from the carton, contact
customer service.
unpacking and Installation
Warning
use a properly grounded electrical
outlet of correct voltage and current
handling capacity.
Do not remove or modify grounded
power plug. use only properly ground-
ed outlets to avoid shock hazard. Not
rated for use in hazardous atmos-
pheres.
Do not use in the presence of flamma-
ble or combustible materials; fire or
explosion may result. This device con-
tains components which may ignite
such materials.
If explosion proof models are required,
contact customer service at
1-800-553-0039 for more information.
Do not use in highly corrosive atmos-
pheres; corrosive fumes and spills
may damage top and internal compo-
nents, creating shock hazard.
Note
Some misalignment of the motor bear-
ings in this product may have occurred
during shipping. prior to using this
product, run the stirrer at maximum
speed for ten minutes to realign the
bearings.