Thermo Scientific Super-Nuova S133320-33, Инструкция по эксплуатации и список запасных частей

Страница: 21 / 33

Factory Defaults - deF
This feature is available for all units and is designed to
restore the control to the default factory settings. NoTe:
The Model Selection feature will need to be re-visited
after resetting the factory defaults (see Model Selection
below).
To reset to the Factory Defaults follow the instructions
given below:
1. plug the unit into the appropriate power, but do
not turn it on (display should be blank), enter the
Service Menu by pressing and holding the
poWer key. after about 3 seconds a single
beep will be heard and you may remove your
finger from the poWer key. The display will
change to
oSP .
2. rotate the center knob until the display reads
def . press the SeT key to accept, and the dis-
play will change to no. rotate the center knob
to change the display to
yeS and press the SeT
key.
3. The unit has now been returned to the factory
default settings. The unit will return to the previ-
ous menu. Select another feature to change, or
press the poWer key again to return to the off
mode.
Model Selection - SeL
This feature is available for all units to select the type
and size, but should only be used by the factory.
To modify/view the Model Selection follow the instructions
given below:
1. plug the unit into the appropriate power, but do
not turn it on (display should be blank), enter the
Service Menu by pressing and holding the
poWer key. after about 3 seconds a single
beep will be heard and you may remove your
finger from the poWer key. The display will
change to
oSP .
21
S
erVICe aND
C
alIBraTIoN