Thermo Scientific Super-Nuova S133320-33, Инструкция по эксплуатации и список запасных частей

Страница: 16 / 33

using HyperTerminal w/rS232
With HyperTerminal you can store the rS232 output data of
a Super-Nuova on a pC. NoTe: other terminal pro-
grams that capture rS232 data can be used as well.
In order to follow this procedure, you must have:
• Microsoft Windows 95‚ or greater with
HyperTerminal installed (it is available from the
Windows installation CD if not installed already).
• a pC that has an available 9 pin DB-9 rS232 con-
nector.
• WHX18 (accessory) – pC to stirrer communica-
tions cable – Connect it from the back of the stir-
rer to the communications port desired.
To Setup HyperTerminal:
1. From the STarT menu of Windows‚ select
aCCeSSorIeS, CoMMuNICaTIoNS, HYperT-
erMINaL
2. Type in a name (example: SuperNuova) that you
would like to refer to the connection by in the
NaMe box. You may also select an icon if you
would like. Then select oK.
3. Select the rS232 port that you plan to use to con-
nect to the stirrer (typically Com 1 or Com 2).
Then select oK.
4. under port settings, select the following:
• BITS per SeCoND: 57,600
• DaTa BITS: 8
• parITY: NoNe
• STop BITS: 1
• FLoW CoNTroL: NoNe
Then Select oK.
o
PeraTIoN
16