Thermo Scientific Super-Nuova S133320-33, Инструкция по эксплуатации и список запасных частей

Страница: 22 / 33

2. rotate the center knob until the display reads
Sel . press the SeT key under the display to
accept, and the display will change to SP (Stir
plate), HP (Hot plate), or S (Stirrer). rotate the
center knob to change the display to the type of
unit required and press the SeT key under the
display again.
3. The display will now change to 7 (7” top), or 10
(10” top). rotate the center knob to change the
display to the size of unit required and press the
SeT key under the display again.
4. The unit will return to the root Service Menu.
Select another feature to change, or press the
poWer key again to return to the off mode.
Flash upgrade - FLS
This feature is available for all units and is designed to
allow a firmware upgrade via rS232 port to be applied
without exchanging controls. NoTe: Special software
and an rS232 cable are required to complete this proce-
dure. Complete instruction will be included with the
firmware upgrade.
General Cleaning Instructions
Keep top surface clean. use a non-abrasive cleaner.
alkali spills, hydro fluoric acid spills or phosphoric acid
spills may damage top and lead to thermal failure. unplug
unit and remove spills promptly. Do not immerse unit for
cleaning. Wipe exterior housing with lightly dampened
cloth containing mild soap solution.
22
S
erVICe aND
C
alIBraTIoN