Thermo Scientific Sorvall ST40, Инструкция по эксплуатации

Страница: 22 / 94

Introduction and Description
Characteristics
1-2 Sorvall ST 40 Thermo Fisher Scientific
Characteristics
The Sorvall ST 40 is an in-vitro diagnostics device according to the
In-Vitro Diagnostics Directive 98/79/EG.
Several rotors with commercial tubes can be used.
The set speed is reached in seconds. The maintenance-free induction
motor ensures quiet and low-vibration operation even at high speeds,
and guarantees a very long lifetime.
The user-friendly control panel makes it easy to pre-set the speed, RCF
value, running time, temperature, and running profile (acceleration and
braking curves). You can choose between the display of speed and RCF
or the entry mode.
These settings can be changed even while the centrifuge is running.
With the help of the
"Pulse"
-key , you can also centrifuge a sample
for just a few seconds, if called for.
The Sorvall ST 40 is equipped with various safety features:
•
The housing and rotor chamber consist of steel plate, the interior of
armour steel, while the front panel is made of high-impact resistant
plastic.
•
The lid is equipped with a view port and a lock.
• The lid of the centrifuge can only be opened while the centrifuge is
switched on and the rotor has come to a complete stop. The centri-
fuge cannot be started until the lid has been closed properly.
• The integrated rotor detection systems ensures that no inadmissible
speed settings can be preselected.
• Electronic Imbalance recognition
•
Lid emergency release: For emergencies only, e.g. during power fail-
ures (see
“Mechanical emergency lid release” on page 7-2 )
WARNING
Do not manipulate the safety devices!