Thermo Scientific SORVALL RC-5C PLUS Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 55

background image

Rotor Information Table SORVALL

®

Centrifuges

RC-5C PLUS

Warranty

Warranty

Thermo Scientific

makes no warranty of any kind, expressed or implied, except as stated in

this warranty policy.

The SORVALL

®

RC-5C PLUS Superspeed Centrifuge is warranted

to be free from defects in material and workmanship for a period of
one year from the date of delivery. The compressor, condenser,
evaporator and all interconnecting tubing are warranted to be free
of defects in material and workmanship for a period of five years
from the date of delivery.

Thermo

will repair or replace and return

free of charge any part which is returned to its factory within said
period, transportation prepaid by user, and which is found upon
inspection to have been defective in materials or workmanship.
This warranty does not apply to any damage to any instrument
resulting from: normal wear and tear; misuse; abuse; use of electri-
cal currents or circuits other than those specified on the plate affixed
to the instrument; accident; negligence; failure to follow operating
instructions; or use of any rotor other than a SORVALL

®

rotor in-

tended for use in this instrument.

Thermo

reserves the right to change, alter, modify, or improve any

of its instruments without any obligation whatsoever to make cor-
responding changes to any instrument previously sold or shipped.

The foregoing obligations are in lieu of all other obligations and
liabilities including negligence and all warranties, of merchant-
ability or otherwise, expressed or implied in fact or by law, and
state our entire and exclusive liability and buyer's exclusive rem-
edy for any claim or damages in connection with the sale or
furnishing of goods or parts, their design, suitability for use,
installation or operation. Thermo will in no event be liable for any
special or consequential damages whatsoever, and our liability
under no circumstances will exceed the contract price for the
goods for which liability is claimed.

«
...
46
47
48
49
50
...
»

Содержание SORVALL RC-5C PLUS
























































Отзывы:

Нет отзывов

Похожие инструкции для SORVALL RC-5C PLUS

Бренд: York Fitness Страницы: 34

Бренд: Radarcan Страницы: 40

Бренд: Zenbooth Страницы: 60

Бренд: Handler Страницы: 25

Бренд: Nakayama Страницы: 37

Бренд: Datavideo Страницы: 48

Бренд: Datavideo Страницы: 34

Бренд: Datavideo Страницы: 3

Бренд: Datavideo Страницы: 34

Бренд: Datavideo Страницы: 8

Бренд: Datavideo Страницы: 10

Бренд: e-survey Страницы: 54

Бренд: E-Pill Страницы: 8

XL-7 Command Station

Бренд: E-Mu Страницы: 22

Бренд: Garmin Страницы: 12

Бренд: Garmin Страницы: 13

Бренд: LANGER EMV-Technik Страницы: 25

Electric Clamshell CSE12-208VCD

Бренд: Lang Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды