Thermo Scientific SORVALL RC-5C PLUS, Руководство пользователя

Страница: 27 / 55

Operation SORVALL ® Centrifuges
4-2
1. Set the main power switch to ON.
2. Set the RUN and MAX temperature switches to the desired run
temperature and maximum temperature. The MAX temperature
setting should be for a value that is at least 5
°
C higher than the
RUN temperature setting.
NOTE
For optimal temperature control at RUN temperatures
below ambient, both the rotor and the rotor chamber
should be at the desired RUN temperature before the
run is started. If the rotor was precooled in the centri-
fuge, the chamber will already be at the desired tem-
perature. If the rotor was precooled by some other means,
you should wait until the temperature display indicates
the desired RUN temperature before starting the run.
The run will not start as long as the displayed tempera-
ture is greater than the MAX temperature setting.
3. Set the key switch on the front panel to NORMAL.
4. Open the chamber door.
5. If applicable, make sure the rotor cover is installed on the rotor
and, for fixed-angle rotors, secured.
6. Place the rotor on the drive spindle and lock it in place by
turning the rotor locking knob counterclockwise.
7. Set the ROTOR CODE switches for the proper ROTOR CODE
number (see Table 4-1).
8. Close the chamber door.
9. Set the RPM switches for the desired run speed.
Table 4-1. Rotor Codes
Rotor Code Rotor Rotor Code Rotor Rotor Code Rotor
06 SE-12
12 SH-MT
09 SM-24
14 F-28/13
15 F-28/36
24 F-28/50
25 F-20/MICRO
Swinging-Bucket –––––––––––––
23 HB-6
07 HB-4
08 HS-4
13 SH-80
18 S-20/17
Fixed-Angle –––––––––––––––––
05 SS-34
27 SLA-1000
26 SA-300
36 SA-512
04 SA-600
37 SA-800
32 SLA-600TC
28 SLA-1500
30 SLA-3000
34 SLC-1500
35 SLC-3000
33 SLC-4000
17 S-20/20
16 S-20/36
29 SH-3000 -buckets
31 SH-3000 -microplates
Vertical/Zonal –––––––––––––––
01 SV-288
02 SV-80
11 TZ-28
21 TZ-28/DL -dynamic load
Continuous Flow –––––––––––––
19 SS-34/KSB-R
20 TZ-28/GK