Thermo Scientific Sorvall LYNX 4000, Инструкция по эксплуатации

Страница: 23 / 72

2
Before Use
Setting Up
Thermo Scientific Sorvall LYNX 4000 / 6000
13
5. Place the wooden protection profiles under the rails.
Figure 4. Support the rail with the wooden protection profiles for the installation.
6. Use several people and other means in order to roll the centrifuge off the pallet.
Figure 5. Rolling the Centrifuge of the Pallet with two Persons
7. Once the centrifuge is in its final position screw the rubber feet entirely down.
First use your hand then the wrench to lower the feet.
The casters should be 5-15 mm off the ground.
CAUTION Do not push at the control panel. Due to the centrifuges weight it must be
controlled by two or more people when rolling of the pallet. Do not stand in front of the
centrifuge when rolling it down the ramp as it is very heavy and it may cause severe injury.
The centrifuge has four steering casters that must be parallel to the rails so the centrifuge
cannot roll of the pallet to the side.