Smart-Vue Pro Duo / Quatro User Guide
Smart-Vue Pro Duo/Quatro User Interface | 25
Data Logging
The Smart-Vue Pro Duo/Quatro data logger shows the
currently programmed data logging cycle(s). Data is shown on
a single screen or splits into distinct areas when two or more
configurations are defined.
Single Data Logging Session (one sensor)
Figure 28. One active data logging session
The Smart-Vue Pro Duo/Quatro display always shows the key
information about the sensor:
1. Data logger name
2. Last-read value
3. Programmed low limit (if applicable)
4. Programmed high limit (if applicable)
5. Indicates on which plug the sensor is connected (left or
right position on Smart-Vue Pro Duo/Quatro data
loggers).
Two Data Logging Sessions (two sensors)
The display can show details for up to two sensors at the
same time:
Figure 29. Two active data logging sessions
6. Latest reading for both sensors
More than two data logging sessions (three or four
sensors)
Gesture
Description
Opens the menu.
Indicates that there are no alarms in any of the data logging sessions currently running on the data
logger.
If any alarms are detected, the icon turns red.
Battery level indicator displays the power level of the Smart-Vue Pro Duo/Quatro.
Smart-Vue Pro LoRaWAN network status: Indicates wireless network status with signal strength bars
(4 bars for best signal, 1 bar if signal is weak).
A warning triangle is displayed if the data logger is disconnected from the wireless network.
Indicates that the data logger is in bluetooth-only mode. Smart-Vue Pro LoRaWAN connectivity is
turned off.
2
3
5
4
1
6
