background image

Smart-Vue Pro Duo / Quatro User Guide

 Introduction  |   9

Hardware Overview

Front View

The front of the Smart-Vue Pro Duo/Quatro data logger is 
comprised of two user interface elements, the touch screen 
LCD and the clear plastic LED status ring around the casing. 
The touch screen shows data collected by the sensor(s) and 
gives you access to the setup menus. The status LED 
provides visual indications of the data logger status. For LED 
color indications, see 

LED Status Indications

.

Figure 4. Smart-Vue Pro Duo/Quatro data logger 

with two external sensors

Rear View

The battery compartment is located behind the device. See 

Activating the Smart-Vue Pro Duo/Quatro Data Logger 
for LoRaWAN

 for instructions on inserting the provided 

batteries. The rear view of the device has a slot to attach the 
data logger to the plastic holder using the padlock (optional). 

See 

Installing the Smart-Vue Pro Duo/Quatro Data 

Logger

 to check procedure of mounting the device.

Figure 5. Rear view of the data logger

Side View

The right side of the Smart-Vue Pro Duo/Quatro data logger 
features a USB port to power your data logger using the 5 V 
micro USB adapter (provided).

Figure 6. Side view of the Smart-Vue Pro 

Duo/Quatro data logger

Bottom View

The Smart-Vue Pro Duo/Quatro data loggers supports a 
combination of wired sensors.

Up to 4 parameters on Smart-Vue Pro Quatro.

Up to 2 parameters with Smart-Vue Pro Duo.

Plugs for connecting wired sensors are located at the bottom 
of the unit (two physical connectors on the Quatro model and 
one physical connector on the duo model). The plugs support 
single and dual sensor probes.

Figure 7. Bottom view of the Smart-Vue Pro Quatro 

data logger (with two physical 
connectors)

Status 
indicator light

LCD display with data 
logger name, 
temperature, signal 
and battery indicators

Smart-Sensor connector 
for external sensors 
(physical connectors with 
Smart-Vue Pro 
Duo/Quatro and 
connectors with the 
Quatro model)

Battery 
compartment 
door

Hole for 
fastening a 
security padlock

Device USB port

Probe / Smart-Sensor 
connectors

Hole for fastening a 
security padlock

Содержание Smart-Vue Pro



















































Отзывы: