Thermo Scientific Ramsey MINI CK100, Руководство по эксплуатации и обслуживанию

Страница: 70 / 97

3-40
3.14.3 Digital Outputs Definition
Digital outputs can be programmed. The following screen shows one logical function per
time, and allows the user to assign it to a physical output. The NEXT key scrolls between the
logical functions. The NC/NO key selects the Normally Open (NO) or Normally Closed (NC)
status of the output. Normally Open means the output is not energized in normal conditions.
To program a function, scroll with NEXT until the function is displayed, then enter the number
of the physical output and confirm with ENTER ; finally scroll with NC/NO until the desired
mode is displayed. By assigning a function to 0, the function is disabled.
Default Selections :
-
Output #1 – NC ALARMS
- Output #2 (TTL) – 0 (Not used)
- Output #3 (TTL) – 0 (Not used)
- Output #4 (TTL) – 0 (Not used)
- Output #5 (TTL) – 0 (Not used)
CAUTION
LOGICAL SELECTIONS RETURN TO THE DEFAULT IF THE
I
NSTRUMENT IS COLD STARTED
.
- I/O DEF SCROLL 5 -
Dig. Output def.
Alarm 2 NC
ENTER NC/NO NEXT
Password:Service
NOTE
TTL #3-#6 outputs can be used with expansion digital output boards connected by
flat cable with blue connector DIG OUT.
Is available n°1 digital output optocoupled that can be connected (direct) with
field. This output #1 is available on connector DIG IN-OUT pins 6 and 7.