Thermo Scientific PikoReal, Руководство пользователя

Страница: 47 / 72

Maintenance
Packing for service
Thermo Fisher Scientific Thermo Scientific PikoReal Real-Time PCR System User Manual 45
5. Disinfect the outside of the instrument or to remove stains using a
cloth dampened with 70% ethanol.
6. Place the instrument in a large plastic bag. Ensure that the drawer
door is out.
7. Place a cloth soaked in the prepared decontaminant solution into
the bag. Ensure that the cloth does not come into contact with the
instrument.
8. Close the bag firmly and leave the instrument in the bag for at least
24 hours.
9. Remove the instrument from the bag.
10. After decontamination, clean the instrument using a mild detergent.
11. After performing this decontamination procedure, enclose a signed
and dated Certificate of Decontamination (see Appendix B:
“
Certificate of Decontamination ”) both inside the transport package
and attached to the outside of the package.
To pack the PikoReal Real-Time PCR System for service, follow the
instructions presented below:
●
Inform about the use of hazardous materials.
●
Remove any UTW vessels, tube strips or single tubes before
decontamination. Decontaminate the instrument.
●
Park the instrument. Refer to “Park instrument” on page 38.
●
Use the original packaging for shipping.
●
Pack the instrument according to the packing instructions.
●
Enclose a dated and signed “ Certificate of Decontamination ” (see
Appendix B) both inside and attached to the outside of the package,
in which you return your instrument (or other items).
●
Enclose the return authorization number (RGA) given by your local
Thermo Fisher Scientific representative.
●
Indicate the fault after you have been in touch with your local
Thermo Fisher Scientific representative or the Thermo Fisher
Scientific technical service department.
Packing for
service