Thermo Scientific PikoReal, Руководство пользователя

Страница: 28 / 72

Installation
Warnings and cautions
26 Thermo Scientific PikoReal Real-Time PCR System User Manual Thermo Fisher Scientific
2. Insert the power cord into the power supply.
3. Insert the power cord into the power outlet.
The system will power up automatically.
Figure 3–10. Connecting the power supply cable and the Ethernet cable
Connect the Ethernet cable to the back of the PikoReal Real-Time PCR
System (Figure 3–10). You must use a shielded Ethernet cable
(Cat5e/Cat6e, FTP/STP). For more information, refer to the
PikoReal
Software User Manual (Cat. no. N12076).
The data port (see Figure 2–2 on page 15) is to be used with USB
memory devices only. For instructions on how to use a USB memory
device, refer to “Running a protocol” on page 30 and “Run data to
USB” on page 39.
This instrument is designed to be safe for use. When correctly installed,
operated and maintained, it will present no hazard to the user.
The following recommendations are given for added user safety.
Ensure that the power supply cable supplied with the unit is always
used. If a correct type of mains cable is not provided, use only cables
certified by the local authorities.
Connecting to the
network
Connecting to the
data port
Warnings and
cautions
Electrical
Power connector
Ethernet port (RJ45)