Thermo Scientific PikoReal, Руководство пользователя

Страница: 29 / 72

Installation
Operational check
Thermo Fisher Scientific Thermo Scientific PikoReal Real-Time PCR System User Manual 27
The power plug should only be inserted into a socket outlet with a
protective ground contact. Never use an extension cable without a
protective ground wire. Always ensure that the electricity supply in the
laboratory conforms to that specified on the type label of the
instrument.
Warning
Only authorized technical service personnel are allowed to
open the instrument. ▲
Warning Do not touch switches or electrical outlets with wet hands.
Switch the instrument off before disconnecting it from the mains
supply.
▲
Before you put the instrument into use, perform the following
operational check:
1. Plug the instrument into the mains. The instrument automatically
proceeds to perform the self tests. The self tests are performed each
time the instrument is turned on.
2. After approximately 30 seconds a beep signal indicates the test
completion.
3. The operational check has passed if no error messages appear. In
case of errors, refer to “Warning and error codes” on page 51.
Note Partial self tests are performed every time a protocol is started. ▲
The PikoReal Software is on the Thermo Scientific PikoReal Real-Time
PCR System CD (Cat. no. N12119). The CD also contains the
instrument and software user manuals.
For installation instructions, refer to the PikoReal Software User Manual
(Cat. no. N12076).
Operational
check
Installing
PikoReal
Software