Thermo Scientific Orion Versa Star Pro, Руководство пользователя

Страница: 14 / 146

Chapter 2

Meter Basics
14

Orion Versa Star Pro Meter User Manual Thermo Scientific
Inserting and Removing Modules
Modules can be added or removed at any time, with the meter powered on or off.
Module Insertion
1. Hold the top (labeled) and bottom tabs on the module with your thumb and index finger and
squeeze the tabs towards each other.
2. Slide the module straight into an open channel grove on the back of the meter. The tabs
should snap into place when the module is fully connected to the meter.
3. Release the top and bottom tabs on the module.
4. If the meter is powered on, it will automatically recognize the module and update the
channel ID display (top, left) with the module ID in the corresponding channel location.
Module Removal
1. Hold the top (labeled) and bottom tabs on the module with your thumb and index finger and
squeeze the tabs towards each other.
2. Pull straight back to remove the module from channel grove on the back of the meter.
3. The meter will automatically recognize that the module has been removed and update the
channel ID display (top, left) with dashes in the previous channel location.