Thermo Scientific mDrop, Руководство пользователя

Страница: 21 / 30

3
Cuvette measurements with SkanIt Software
Creating a new measurement session
Thermo Fisher Scientific Thermo Scientific μDrop and μDrop Duo Plates User Manual 15
Each measurement or a series of measurements should contain at least one blank sample cuvette.
The blank is added to the G11 well of the first plate in the layout (see
Figure 13 and Figure 15 ).
The unknown samples are added to the following plates, also to position G11 (see Figure 14 and
Figure 16 ). Add plates by clicking Add new in the Plate Layout ribbon.
All existing sample types are available for the layout and calculations.
Figure 13. Cuvette layout of μDrop Plate with a blank sample cuvette,
Figure 14. Cuvette layout of μDrop Plate with an unknown sample