Thermo Scientific KingFisher Flex Скачать руководство пользователя страница 22

Страница: 22 / 94

Installation

Requirements

22 Thermo Scientific KingFisher Flex User Manual

Thermo Fisher Scientific

Retain the original packaging and packing material for future transportation.

The packaging is designed to assure safe transport and minimize transit

damage. Use of alternative packaging materials may invalidate the

warranty. Also retain all instrument-related documentation provided by the

manufacturer for future use.

Check the enclosed packing list against order. In case of any deviations,

contact your local Thermo Fisher Scientific representative or Thermo Fisher

Scientific Oy.

Visually inspect the transport package, the instrument and the accessories

for any possible transport damage.

If the carton has been damaged in transit, it is particularly important that

you retain it for inspection by the carrier in case there has also been

damage to the instrument.

Neither the manufacturer nor its agents can be held responsible for any

damage incurred in transit, but the manufacturer will make every effort to

help obtain restitution from the carrier. Upon receipt of the carrier's

inspection report, arrangements will be made for repair or replacement.

If any parts are damaged, contact your local Thermo Fisher Scientific

representative or Thermo Fisher Scientific Oy.

When you set up your KingFisher Flex, avoid sites of operation with excess

dust, vibrations, strong magnetic fields, direct sunlight or UV light, draft,

excessive moisture or large temperature fluctuations.



Make sure the working area is flat, dry, clean and vibration-proof and

leave additional room for accessories, cables, and reagent bottles.



Make sure there is sufficient room behind the instrument to enable

disconnecting the device.



Make sure the ambient air is clean and free of corrosive vapors, smoke

and dust.



Make sure the ambient temperature range is b5°C (41°F) and

+40°C (104°F).



Make sure relative humidity is between 10% and 80% (non-

condensing).

Leave sufficient space (at least 10 cm) on both sides and at the back of the

unit to allow adequate air circulation.

The KingFisher Flex does not produce operating noise at a level that would

be harmful. No sound level measurements are required after installation.

Caution

Do not operate the instrument in an environment where

potentially damaging liquids or gases are present.

Checking delivery

Requirements

Содержание KingFisher Flex































































































Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды

Thermo Scientific KingFisher Flex, Руководство пользователя

Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды