Thermo Scientific KingFisher Flex Скачать руководство пользователя страница 23

Страница: 23 / 94

Installation

Precautions and limitations

Thermo Fisher Scientific

Thermo Scientific KingFisher Flex User Manual 23

Place the instrument on a normal laboratory bench. The net weight of the

entire equipment is approx. 28 kg [62 lbs.].

The instrument operates at voltages of 100

–240 Vac and the frequency

range of 50/60 Hz.



Always ensure that the local supply voltage in the laboratory conforms

to that specified on the type label on the back of the instrument (Figure

–4).



Do not smoke, eat or drink while using the KingFisher Flex.



Wash your hands thoroughly after handling test fluids.



Observe normal laboratory procedures for handling potentially

dangerous samples.



Wear proper protection clothing, such as disposable gloves and

laboratory coats, according to good laboratory practice.



Ensure that the working area is well ventilated.



Never spill fluids in or on the equipment.

Caution

The KingFisher Flex should not be kept in close proximity to

magnetic tapes, computer discs or other magnetic storage systems, such

as credit cards, as these can be damaged by the strong magnetic field of

the KingFisher Flex heads.

Do not hold the KingFisher Flex heads close to a PC display, since this

may cause damage to the display.

Do not use metal tools when handling KingFisher Flex heads.

Warning

This product contains very strong permanent magnets. People

wearing a pacemaker or metallic prostheses should not use this product. A

pacemaker or prostheses may be affected or damaged if it comes in close

contact with a strong magnetic field.

This section describes the installation setups that you must carry out before

operating or relocating the instrument.

The instrument comes with two transport locks (Figure 3

–9): the tip comb

holder transport lock and the heating block transport lock. Remove both the

transport locks.

Make sure both the transport locks are released before you put the

instrument into operation.

Precautions and

limitations

Installation

setups

Releasing the

transport locks

Содержание KingFisher Flex































































































Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды

Thermo Scientific KingFisher Flex, Руководство пользователя

Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды