Thermo Scientific KingFisher Flex Скачать руководство пользователя страница 21

Страница: 21 / 94

Thermo Fisher Scientific

Thermo Scientific KingFisher Flex User Manual 21

Chapter 3

Installation

This section covers the relevant procedures to be carried out on receipt of

the instrument.

Move the packed instrument to its site of operation. To prevent

condensation, the instrument should be left in its protective, antistatic

plastic wrapping until the ambient temperature has been reached. Unpack

the KingFisher Flex instrument and accessories carefully with the arrows

on the transport package pointing upwards. Remove the instrument from

the package and place it on a level surface. Refer to the enclosed

unpacking instructions.

The following notes and instructions are sent with the instrument and are

immediately available when you open the package:



Unpacking instructions



KingFisher Flex Feedback Form



Warranty Certificate card



Packing instructions/Packing list



Thermo Scientific

™ KingFisher™ Flex User Manual

and

Thermo

Scientific™ KingFisher™ Flex Quick Reference Guide



Transportation discrepancy report



BindIt Software package

Caution

Do not touch or loosen any screws or parts other than those

specifically designated in the instructions. Doing so might cause

misalignment and will void the instrument warranty.

Warning

The KingFisher Flex weighs approximately 28 kg [62 lbs.] without

the transport package and should be lifted with care. It is recommended

that two persons lift the instrument together, taking proper precautions to

avoid injury.

To lift the instrument, put your fingers under the bottom on either sides and

lift it with your back straight.

Delivery check

Unpacking

Содержание KingFisher Flex































































































Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды

Thermo Scientific KingFisher Flex, Руководство пользователя

Результаты поиска

Содержание KingFisher Flex

Отзывы:

Похожие инструкции для KingFisher Flex

Бренды по названию

Популярные бренды