Installation
Operating environment
• Place the instrument on a level surface away from vibrations emanating from other pieces of
equipment.
• Allow at least 5 cm (2 in) free space at the back of the instrument to allow for proper ventilation and
prevent overheating of electronic components.
• Set up the instrument away from direct light sources, such as windows. Ambient room lighting can
enter the imaging path and affect the image quality.
• Operating temperature range: 4°–32°C (40°–90°F).
• Relative humidity range: <80%.
IMPORTANT!
Do not position the instrument so that it is difficult to turn off the main power switch
located on the back of the instrument.
In case of an instrument malfunction, turn the main power switch to the OFF position and disconnect
the instrument from the wall outlet.
Install the instrument
1.
Unpack the instrument and place the instrument on a flat, level, dry surface.
2.
Remove the thin plastic protector film from the touch-screen display.
3.
Plug one end of the power cord appropriate for your region into the instrument.
4.
Plug the power cord into the electrical outlet. Be sure to use only the power cord supplied
with your instrument. Powering the instrument with an unapproved power cord may damage the
instrument.
Turn ON the instrument
After unboxing, upon switching on the instrument for the first time, it will run through a series of set-up
screens.
• Read the End User License Agreement and press
Agree
to proceed with start up.
• Set the
Date
and
Time
using the buttons (see “Set the date and time”
). Press
Next
.
• Upon completion, press
Done
. You will proceed to the Home screen and can begin using the
instrument as described below.
2
8
Countess
™
3 Automated Cell Counter User Guide
Содержание Invitrogen AMQAX2000
Страница 55: ......
